You're viewing a previously published revision of this guide.  View latest revision

Older
Mar 11, 2025 - 08:03:14
Mar 21, 2025 - 07:03:39 Mar 21, 2025 - 07:03:36 Mar 19, 2025 - 07:03:06 Mar 18, 2025 - 04:03:49 Mar 18, 2025 - 04:03:48 Mar 13, 2025 - 04:03:51 Mar 13, 2025 - 04:03:39 Mar 13, 2025 - 04:03:34 Mar 13, 2025 - 04:03:34 Mar 13, 2025 - 03:03:33 Mar 13, 2025 - 03:03:30 Mar 13, 2025 - 03:03:34 Mar 13, 2025 - 03:03:32 Mar 13, 2025 - 03:03:29 Mar 13, 2025 - 03:03:16 Mar 13, 2025 - 03:03:01 Mar 13, 2025 - 03:03:31 Mar 13, 2025 - 03:03:11 Mar 13, 2025 - 03:03:50 Mar 13, 2025 - 03:03:34 Mar 13, 2025 - 03:03:19 Mar 13, 2025 - 03:03:58 Mar 12, 2025 - 10:03:56 Mar 12, 2025 - 10:03:44 Mar 12, 2025 - 10:03:35 Mar 12, 2025 - 10:03:25 Mar 12, 2025 - 10:03:20 Mar 12, 2025 - 10:03:04 Mar 12, 2025 - 10:03:08 Mar 12, 2025 - 10:03:15 Mar 12, 2025 - 10:03:22 Mar 12, 2025 - 10:03:35 Mar 12, 2025 - 09:03:33 Mar 12, 2025 - 09:03:34 Mar 12, 2025 - 09:03:54 Mar 12, 2025 - 09:03:55 Mar 12, 2025 - 08:03:51 Mar 12, 2025 - 08:03:25 Mar 12, 2025 - 07:03:00 Mar 12, 2025 - 07:03:45 Mar 12, 2025 - 07:03:25 Mar 12, 2025 - 07:03:49 Mar 12, 2025 - 06:03:38 Mar 12, 2025 - 05:03:55 Mar 12, 2025 - 05:03:47 Mar 12, 2025 - 05:03:25 Mar 12, 2025 - 05:03:01 Mar 12, 2025 - 05:03:48 Mar 12, 2025 - 05:03:34 Mar 12, 2025 - 05:03:23 Mar 12, 2025 - 05:03:09 Mar 12, 2025 - 05:03:40 Mar 12, 2025 - 04:03:57 Mar 12, 2025 - 04:03:33 Mar 12, 2025 - 04:03:21 Mar 12, 2025 - 04:03:31 Mar 12, 2025 - 04:03:46 Mar 12, 2025 - 04:03:28 Mar 12, 2025 - 03:03:25 Mar 12, 2025 - 03:03:15 Mar 12, 2025 - 03:03:05 Mar 12, 2025 - 03:03:16 Mar 12, 2025 - 03:03:07 Mar 12, 2025 - 03:03:58 Mar 12, 2025 - 03:03:20 Mar 12, 2025 - 03:03:05 Mar 12, 2025 - 03:03:58 Mar 12, 2025 - 02:03:06 Mar 12, 2025 - 02:03:57 Mar 11, 2025 - 10:03:13 Mar 11, 2025 - 10:03:50 Mar 11, 2025 - 10:03:32 Mar 11, 2025 - 10:03:19 Mar 11, 2025 - 10:03:02 Mar 11, 2025 - 10:03:12 Mar 11, 2025 - 10:03:58 Mar 11, 2025 - 10:03:43 Mar 11, 2025 - 10:03:05 Mar 11, 2025 - 10:03:53 Mar 11, 2025 - 10:03:58 Mar 11, 2025 - 10:03:18 Mar 11, 2025 - 09:03:22 Mar 11, 2025 - 09:03:40 Mar 11, 2025 - 09:03:47 Mar 11, 2025 - 09:03:37 Mar 11, 2025 - 09:03:19 Mar 11, 2025 - 09:03:02 Mar 11, 2025 - 09:03:39 Mar 11, 2025 - 09:03:06 Mar 11, 2025 - 09:03:50 Mar 11, 2025 - 09:03:16 Mar 11, 2025 - 09:03:09 Mar 11, 2025 - 09:03:04 Mar 11, 2025 - 09:03:13 Mar 11, 2025 - 09:03:02 Mar 11, 2025 - 09:03:28 Mar 11, 2025 - 09:03:16 Mar 11, 2025 - 09:03:24 Mar 11, 2025 - 09:03:11 Mar 11, 2025 - 08:03:53 Mar 11, 2025 - 08:03:06 Mar 11, 2025 - 08:03:37 Mar 11, 2025 - 08:03:21 Mar 11, 2025 - 08:03:01 Mar 11, 2025 - 08:03:32 Mar 11, 2025 - 08:03:20 Mar 11, 2025 - 08:03:12 Mar 11, 2025 - 08:03:14 Mar 11, 2025 - 08:03:41 Mar 11, 2025 - 08:03:34 Mar 11, 2025 - 07:03:53 Mar 11, 2025 - 07:03:10 Mar 11, 2025 - 07:03:39
Newer

05. Compact CNC Electronics Enclosure

Written By: Simon Davie (and one other contributor)
  • Comments: 0
  • Favorites: 0

Steps

3

Sections

1

Flags

3

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

User-Contributed Guide

User-Contributed Guide

This guide is not managed by the site's staff.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

  1. It is recommended to have the following tools available for assembling the Compact CNC Electronics Enclosure:

    • It is recommended to have the following tools available for assembling the Compact CNC Electronics Enclosure:

    • Allen Key / Hex Wrenches in the following sizes: 2mm, 3mm & 5mm

    • Wire cutters & a wire stripper

    • Crimping tool (JST-XH, Molex-Micro fit and 18-14AWG Fork + Spade terminals)

    • Cross slot / phillips and flat screwdrivers

    • Soldering Iron with an M3 heat insert tip

  2. The following printed parts need preparation: 4x compact_cnc_electronics_corner printed part 2x compact_cnc_electronics_btt_rodent printed part

    • The following printed parts need preparation:

    • 4x compact_cnc_electronics_corner printed part

    • 2x compact_cnc_electronics_btt_rodent printed part

    • 2x compact_cnc_electronics_psu printed part

    • This part also has sacrificial layers which need to be cleared

Author

with 1 other contributor

Simon Davie

Member since: 8/5/21

27,210 Reputation

56 Guides authored

View Statistics:

Past 24 Hours: 1

Past 7 Days: 27

Past 30 Days: 173

All Time: 1,373