Steps
2
- 03. Linear Rails 2 steps
In Progress
This guide is currently being written. Reload periodically to see the latest changes.
User-Contributed Guide
This guide is not managed by the site's staff.
Private
This guide will not appear in search results and can only be viewed by team members!
Quiz
0
Introduction
Please note: All measurements and component counts provided in this guide are based upon building a 300x300 V-Core 3.
If you are building a machine of a different size, please refer to the following list for the linear rail lengths and required number of fasteners:
- 200x200: 2x 250mm, 3x 300mm, 56x M3 Screw, 56x T-Nuts
- 300x300: 2x 350mm, 3x 400mm, 84x M3 Screw, 84x T-Nuts
- 400x400: 2x 450mm, 3x 500mm, 112x M3 Screw, 112x T-Nuts
- 500x500: 2x 550mm, 3x 600mm, 140x M3 Screw, 140x T-Nuts
-
-
3x 400mm MGN12 Linear Rail
-
2x 350mm MGN12 Linear Rail
-
84x M3x12 Cap Head Screw
-
14x 3030 Drop-in T-Nut - M3
-
-
-
The linear rails are supplied with a protective oil coating on them, so prepare your work surface with disposable and absorbent paper towels
-
Carefully open one end of the linear rail packaging and remove the rail. Place the rail upon the paper towels and dispose of the packaging
-
Take a paper towel and carefully wipe the excess lubricant from the rail
-
