You're viewing a previously published revision of this guide.  View latest revision

Older
Feb 09, 2023 - 08:02:58
Mar 14, 2023 - 04:03:02 Mar 14, 2023 - 03:03:02 Mar 14, 2023 - 03:03:46 Mar 14, 2023 - 03:03:42 Feb 16, 2023 - 03:02:52 Feb 16, 2023 - 03:02:44 Feb 16, 2023 - 03:02:51 Feb 16, 2023 - 03:02:20 Feb 16, 2023 - 03:02:58 Feb 16, 2023 - 03:02:55 Feb 16, 2023 - 01:02:01 Feb 16, 2023 - 01:02:21 Feb 16, 2023 - 01:02:05 Feb 16, 2023 - 01:02:20 Feb 16, 2023 - 01:02:02 Feb 15, 2023 - 10:02:26 Feb 15, 2023 - 10:02:42 Feb 15, 2023 - 10:02:34 Feb 15, 2023 - 10:02:30 Feb 15, 2023 - 10:02:08 Feb 15, 2023 - 10:02:36 Feb 15, 2023 - 10:02:24 Feb 15, 2023 - 10:02:46 Feb 15, 2023 - 10:02:26 Feb 15, 2023 - 09:02:53 Feb 15, 2023 - 09:02:58 Feb 15, 2023 - 09:02:36 Feb 15, 2023 - 09:02:16 Feb 15, 2023 - 08:02:12 Feb 15, 2023 - 08:02:01 Feb 15, 2023 - 04:02:48 Feb 14, 2023 - 07:02:05 Feb 14, 2023 - 07:02:20 Feb 14, 2023 - 07:02:18 Feb 14, 2023 - 07:02:49 Feb 14, 2023 - 07:02:56 Feb 14, 2023 - 07:02:46 Feb 14, 2023 - 07:02:38 Feb 14, 2023 - 07:02:27 Feb 14, 2023 - 07:02:51 Feb 09, 2023 - 10:02:58 Feb 09, 2023 - 08:02:28 Feb 09, 2023 - 08:02:58 Feb 09, 2023 - 08:02:50 Feb 09, 2023 - 08:02:52 Feb 09, 2023 - 08:02:27 Feb 09, 2023 - 08:02:13 Feb 09, 2023 - 08:02:21 Feb 09, 2023 - 07:02:23 Feb 09, 2023 - 07:02:20 Feb 09, 2023 - 07:02:15 Feb 09, 2023 - 07:02:35 Feb 09, 2023 - 07:02:20 Feb 09, 2023 - 07:02:43 Feb 09, 2023 - 07:02:30
Newer

V-Hive Enclosure - Prusa mini

Written By: Miguel Cruz (and one other contributor)
  • Comments: 0
  • Favorites: 0

Steps

2

Sections

1

Flags

3

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

User-Contributed Guide

User-Contributed Guide

This guide is not managed by the site's staff.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

  1. Mounting Rails 4x 90 Degree Corner Bracket Assembly

    • Mounting Rails

    • 4x 90 Degree Corner Bracket Assembly

    • Make sure to place the 90 degree corner bracket assemblies accordingly to the distances bellow:

    • 150 mm

    • 200

    • 110 mm

    • 135.5 mm

    • The measurements are the same for the other rail.

  2. Once all measurements are correct with Step 1 proceed to tighten the M6x12 screws to the frame. Tighten the screws to the printer frame to ensure a stiff connection.

    • Once all measurements are correct with Step 1 proceed to tighten the M6x12 screws to the frame.

    • Tighten the screws to the printer frame to ensure a stiff connection.

Author

with 1 other contributor

Miguel Cruz

Member since: 2/6/23

5,326 Reputation

29 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 8

All Time: 470