Steps
3
- V-Hive Enclosure - Prusa Mini 3 steps
In Progress
This guide is currently being written. Reload periodically to see the latest changes.
User-Contributed Guide
This guide is not managed by the site's staff.
Private
This guide will not appear in search results and can only be viewed by team members!
Quiz
0
-
-
M6 x 14 mm Countersink Screw
-
3030 Drop In T-Nut M6
-
90 Degree Corner Bracket.
-
-
-
Mounting Rails
-
4x 90 Degree Corner Bracket Assembly
-
Make sure to place the 90 degree corner bracket assemblies accordingly to the distances bellow:
-
110 mm
-
200
-
The measurements are the same for the other rail.
-
Keep this side on the front of the printer.
-
-
-
Remove the printer's rubber feet before mounting it to the V-Hive Enclosure.
-
Make sure the rails are parallel with a distance of 149.2 mm.
-
Tighten the M6x14mm countersink screws to the printer frame to ensure a stiff connection.
-
Center the printer on the enclosure by ensuring a distance of 145.4 mm.
-
Once all measurements are correct proceed to tighten the three M6x14 screws on the rails to the frame.
-
