Skip to main content

You're viewing a previously published revision of this guide.  View latest revision

Older Newer

Introduction

BEFORE STARTING:

Before beginning this guide, you must prepare all the necessary wires for the assembly. Below is a list of the required wires. The following nomenclature will be used: (Wire Length)_(AWG)_(Wire Color)_(A-End Connector)_(B-End Connector)_(ID number).

Use a small piece of tape to label each wire to ensure a smooth assembly process.

  • WIRING LIST

Simon Davie

Member since: 8/5/21

27,210 Reputation

56 Guides authored

View Statistics:

Past 24 Hours: 14

Past 7 Days: 119

Past 30 Days: 671

All Time: 7,157