You're viewing a previously published revision of this guide.  View latest revision

Older
Mar 13, 2025 - 09:03:45
Mar 24, 2025 - 04:03:56 Mar 24, 2025 - 04:03:50 Mar 24, 2025 - 04:03:24 Mar 24, 2025 - 04:03:30 Mar 24, 2025 - 04:03:52 Mar 24, 2025 - 04:03:49 Mar 24, 2025 - 04:03:56 Mar 24, 2025 - 04:03:04 Mar 24, 2025 - 03:03:14 Mar 24, 2025 - 03:03:18 Mar 24, 2025 - 03:03:23 Mar 21, 2025 - 08:03:49 Mar 21, 2025 - 08:03:27 Mar 21, 2025 - 07:03:13 Mar 21, 2025 - 07:03:10 Mar 21, 2025 - 07:03:49 Mar 21, 2025 - 06:03:08 Mar 21, 2025 - 06:03:19 Mar 21, 2025 - 06:03:53 Mar 21, 2025 - 06:03:29 Mar 21, 2025 - 06:03:21 Mar 21, 2025 - 06:03:52 Mar 21, 2025 - 06:03:57 Mar 21, 2025 - 05:03:26 Mar 21, 2025 - 05:03:11 Mar 21, 2025 - 05:03:30 Mar 21, 2025 - 05:03:40 Mar 21, 2025 - 05:03:26 Mar 21, 2025 - 05:03:27 Mar 21, 2025 - 05:03:24 Mar 21, 2025 - 05:03:02 Mar 21, 2025 - 05:03:53 Mar 21, 2025 - 05:03:26 Mar 21, 2025 - 05:03:03 Mar 21, 2025 - 05:03:40 Mar 21, 2025 - 05:03:56 Mar 21, 2025 - 05:03:47 Mar 21, 2025 - 04:03:27 Mar 21, 2025 - 04:03:38 Mar 21, 2025 - 04:03:33 Mar 21, 2025 - 04:03:33 Mar 21, 2025 - 04:03:08 Mar 21, 2025 - 04:03:56 Mar 21, 2025 - 04:03:11 Mar 21, 2025 - 04:03:02 Mar 21, 2025 - 04:03:00 Mar 21, 2025 - 04:03:52 Mar 21, 2025 - 04:03:15 Mar 21, 2025 - 04:03:55 Mar 21, 2025 - 04:03:28 Mar 21, 2025 - 04:03:17 Mar 19, 2025 - 06:03:55 Mar 17, 2025 - 08:03:42 Mar 17, 2025 - 07:03:37 Mar 17, 2025 - 07:03:11 Mar 17, 2025 - 07:03:58 Mar 17, 2025 - 07:03:48 Mar 17, 2025 - 07:03:26 Mar 17, 2025 - 07:03:07 Mar 17, 2025 - 07:03:40 Mar 17, 2025 - 07:03:31 Mar 17, 2025 - 07:03:12 Mar 17, 2025 - 07:03:58 Mar 17, 2025 - 07:03:49 Mar 17, 2025 - 07:03:25 Mar 17, 2025 - 07:03:13 Mar 17, 2025 - 07:03:32 Mar 17, 2025 - 07:03:48 Mar 17, 2025 - 07:03:20 Mar 17, 2025 - 07:03:38 Mar 17, 2025 - 05:03:31 Mar 17, 2025 - 05:03:46 Mar 17, 2025 - 05:03:50 Mar 17, 2025 - 05:03:58 Mar 17, 2025 - 05:03:12 Mar 17, 2025 - 05:03:00 Mar 17, 2025 - 04:03:57 Mar 17, 2025 - 04:03:34 Mar 17, 2025 - 04:03:22 Mar 17, 2025 - 04:03:11 Mar 17, 2025 - 03:03:10 Mar 17, 2025 - 03:03:04 Mar 17, 2025 - 03:03:58 Mar 17, 2025 - 02:03:03 Mar 13, 2025 - 10:03:34 Mar 13, 2025 - 10:03:19 Mar 13, 2025 - 09:03:34 Mar 13, 2025 - 09:03:27 Mar 13, 2025 - 09:03:59 Mar 13, 2025 - 09:03:48 Mar 13, 2025 - 09:03:22 Mar 13, 2025 - 09:03:45 Mar 13, 2025 - 08:03:39 Mar 13, 2025 - 08:03:55 Mar 13, 2025 - 08:03:39 Mar 13, 2025 - 08:03:27 Mar 13, 2025 - 08:03:36 Mar 13, 2025 - 08:03:48 Mar 13, 2025 - 08:03:26 Mar 13, 2025 - 08:03:08 Mar 13, 2025 - 08:03:05 Mar 13, 2025 - 08:03:58 Mar 13, 2025 - 07:03:33 Mar 13, 2025 - 05:03:28 Mar 13, 2025 - 05:03:06 Mar 13, 2025 - 05:03:32
Newer

04. Advanced Bundle

Written By: Simon Davie (and one other contributor)
  • Comments: 2
  • Favorites: 0

Steps

7

Sections

1

Flags

3

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

User-Contributed Guide

User-Contributed Guide

This guide is not managed by the site's staff.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

Introduction

BEFORE STARTING:

Before beginning this guide, you must prepare all the necessary wires for the assembly. Below is a list of the required wires. The following nomenclature will be used: (Wire Length)_(AWG)_(Wire Color)_(A-End Connector)_(B-End Connector)_(ID number).

Use a small piece of tape to label each wire to ensure a smooth assembly process.

  • WIRING LIST

  1. 4x Stepper driver - OMC DM542T

    • 4x Stepper driver - OMC DM542T

    • 8x M4x16 cap head screw

    • 8x M4 washer

    • 8x M4 locking hex nut

  4. 1x CNCDrive AXBB-E CNC controller

    • 1x CNCDrive AXBB-E CNC controller

    • 4x Spacer - Nylon - 4.2x6.3x10mm

    • 4x M4x25 cap head screw

    • 4x M4 locking hex nut

  5. 1x CNCDrive AXBB-E CNC controller 4x Spacer - Nylon - 4.2x6.3x10mm 4x M4x25 cap head screw

    • 1x CNCDrive AXBB-E CNC controller

    • 4x Spacer - Nylon - 4.2x6.3x10mm

    • 4x M4x25 cap head screw

  6. 4x M4x25 cap head screw 4x M5 locking hex nut

    • 4x M4x25 cap head screw

    • 4x M5 locking hex nut

    • 1x Meanwell RS-15-5 5V PSU

    • 1x Meanwell RSP-75-24 24V PSU

    • 5x M3x6 cap head screw

    • 5x M3 washer

Author

with 1 other contributor

Simon Davie

Member since: 8/5/21

27,210 Reputation

56 Guides authored

View Statistics:

Past 24 Hours: 12

Past 7 Days: 105

Past 30 Days: 657

All Time: 7,143