You're viewing a previously published revision of this guide. View latest revision

Feb 09, 2023 - 09:02:58

Mar 14, 2023 - 04:03:16 Mar 14, 2023 - 03:03:13 Mar 14, 2023 - 03:03:23 Mar 14, 2023 - 03:03:16 Feb 16, 2023 - 03:02:18 Feb 16, 2023 - 03:02:32 Feb 16, 2023 - 03:02:31 Feb 16, 2023 - 03:02:24 Feb 16, 2023 - 03:02:45 Feb 16, 2023 - 02:02:38 Feb 16, 2023 - 01:02:32 Feb 16, 2023 - 01:02:20 Feb 16, 2023 - 01:02:14 Feb 15, 2023 - 10:02:23 Feb 15, 2023 - 10:02:00 Feb 15, 2023 - 10:02:31 Feb 15, 2023 - 10:02:17 Feb 15, 2023 - 10:02:12 Feb 15, 2023 - 10:02:26 Feb 15, 2023 - 10:02:05 Feb 15, 2023 - 09:02:46 Feb 15, 2023 - 09:02:36 Feb 15, 2023 - 09:02:31 Feb 15, 2023 - 08:02:35 Feb 15, 2023 - 06:02:10 Feb 15, 2023 - 06:02:56 Feb 15, 2023 - 04:02:17 Feb 15, 2023 - 04:02:26 Feb 14, 2023 - 10:02:07 Feb 14, 2023 - 08:02:06 Feb 14, 2023 - 08:02:11 Feb 14, 2023 - 08:02:58 Feb 14, 2023 - 01:02:48 Feb 09, 2023 - 10:02:04 Feb 09, 2023 - 10:02:01 Feb 09, 2023 - 10:02:49 Feb 09, 2023 - 09:02:07 Feb 09, 2023 - 09:02:58 Feb 09, 2023 - 09:02:47 Feb 09, 2023 - 09:02:40 Feb 09, 2023 - 09:02:56 Feb 09, 2023 - 09:02:06

Newer

V-Hive Enclosure - Prusa MK3s

Written By: Miguel Cruz (and one other contributor)

Comments: 0
Favorites: 0

Steps

Step 1 V-Hive Enclosure - Prusa MK3s

Mounting Rails
4x 90 Degree Corner Bracket Assembly
Make sure to place the 90 degree corner bracket assemblies accordingly to the distances bellow:

Step 2 Mount the Prusa MK3s

Once all measurements are correct with Step 1 proceed to tighten the M6x12 screws to the frame.

Once all measurements are correct with Step 1 proceed to tighten the M6x12 screws to the frame.
Tighten the screws to the printer frame to ensure a stiff connection.