You're viewing a previously published revision of this guide.  View latest revision

Older
Feb 09, 2023 - 10:02:15
Mar 14, 2023 - 07:03:00 Mar 14, 2023 - 04:03:22 Mar 14, 2023 - 03:03:19 Mar 14, 2023 - 03:03:45 Mar 14, 2023 - 03:03:25 Feb 16, 2023 - 03:02:21 Feb 16, 2023 - 03:02:22 Feb 16, 2023 - 03:02:00 Feb 16, 2023 - 03:02:21 Feb 16, 2023 - 03:02:15 Feb 16, 2023 - 03:02:06 Feb 16, 2023 - 03:02:10 Feb 16, 2023 - 03:02:08 Feb 16, 2023 - 03:02:01 Feb 16, 2023 - 02:02:12 Feb 16, 2023 - 01:02:37 Feb 16, 2023 - 01:02:26 Feb 16, 2023 - 01:02:25 Feb 15, 2023 - 10:02:04 Feb 15, 2023 - 10:02:45 Feb 15, 2023 - 10:02:38 Feb 15, 2023 - 10:02:39 Feb 15, 2023 - 10:02:24 Feb 15, 2023 - 10:02:02 Feb 15, 2023 - 09:02:30 Feb 15, 2023 - 08:02:59 Feb 15, 2023 - 04:02:43 Feb 15, 2023 - 04:02:48 Feb 14, 2023 - 10:02:02 Feb 14, 2023 - 10:02:44 Feb 14, 2023 - 07:02:12 Feb 14, 2023 - 07:02:06 Feb 14, 2023 - 07:02:43 Feb 14, 2023 - 07:02:17 Feb 14, 2023 - 07:02:06 Feb 09, 2023 - 10:02:40 Feb 09, 2023 - 10:02:15 Feb 09, 2023 - 10:02:14 Feb 09, 2023 - 10:02:59 Feb 09, 2023 - 10:02:13 Feb 09, 2023 - 09:02:29 Feb 09, 2023 - 09:02:32 Feb 09, 2023 - 09:02:11 Feb 09, 2023 - 09:02:15 Feb 09, 2023 - 09:02:27 Feb 09, 2023 - 09:02:19
Newer

V-Hive Enclosure - Ender 3 series

Written By: Miguel Cruz (and one other contributor)
  • Comments: 0
  • Favorites: 0

Steps

2

Sections

1

Flags

3

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

User-Contributed Guide

User-Contributed Guide

This guide is not managed by the site's staff.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

  1. Mounting Rails 4x 90 Degree Corner Bracket Assembly

    • Mounting Rails

    • 4x 90 Degree Corner Bracket Assembly

    • Make sure to place the 90 degree corner bracket assemblies accordingly to the distances bellow:

    • middle? 150 mm. Most likey, would have to test

    • 200 mm

    • 281.6 mm

    • 135 mm

  2. Once all measurements are correct with Step 1 proceed to tighten the M6x12 screws to the frame. Tighten the screws to the printer frame to ensure a stiff connection.

    • Once all measurements are correct with Step 1 proceed to tighten the M6x12 screws to the frame.

    • Tighten the screws to the printer frame to ensure a stiff connection.

Author

with 1 other contributor

Miguel Cruz

Member since: 2/6/23

5,326 Reputation

29 Guides authored

View Statistics:

Past 24 Hours: 2

Past 7 Days: 3

Past 30 Days: 7

All Time: 618