09. Spool Holder (Optional)

Written By: Rat Rig
  • Comments: 5
  • Favorites: 0
  • Completions: 9

Difficulty

Moderate

Steps

2

Time Required

Suggest a time??

Sections

1

Flags

0

  1. Lock collars. After you stack this sub-assembly, tighten the set screws on the lock collars to lock the stack in place. Lead Screw

    • Lock collars. After you stack this sub-assembly, tighten the set screws on the lock collars to lock the stack in place.

    • Lead Screw

    • Ball Bearing 688Z

    • Cap Head Screw M6x12mm

    • 3030 Drop-in T-Nut M6. Set in position, but don't tighten yet.

    • Spool holder printed parts (get the STLs here).

    Edit

  2. Cap Head M6x12mm

    • Cap Head M6x12mm

    • 3030 Drop-in T-Nut M6. Slide it inside the slot until it's right underneath the M6 screw hole.

    • Cap Head Screw M3x12mm

    • Filament guide (printed part)

    Edit
Finish Line

9 other people completed this guide.

Author

Rat Rig

Member since: 07/10/2020

18,170 Reputation

79 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 6

Past 30 Days: 26

All Time: 4,675