You're viewing a previously published revision of this guide. View latest revision

Apr 27, 2023 - 09:04:50

Nov 17, 2023 - 08:11:51 May 03, 2023 - 01:05:03 May 03, 2023 - 01:05:21 May 02, 2023 - 04:05:10 May 02, 2023 - 04:05:09 May 02, 2023 - 04:05:54 May 02, 2023 - 03:05:47 May 02, 2023 - 03:05:55 May 02, 2023 - 03:05:02 May 02, 2023 - 03:05:48 May 02, 2023 - 03:05:55 May 02, 2023 - 03:05:22 May 02, 2023 - 03:05:18 May 02, 2023 - 03:05:57 May 02, 2023 - 03:05:38 May 02, 2023 - 03:05:10 May 02, 2023 - 03:05:12 May 02, 2023 - 02:05:13 May 02, 2023 - 02:05:07 May 02, 2023 - 02:05:31 May 02, 2023 - 02:05:54 May 02, 2023 - 02:05:31 May 02, 2023 - 02:05:23 May 02, 2023 - 02:05:24 May 02, 2023 - 02:05:10 May 02, 2023 - 02:05:48 May 02, 2023 - 02:05:53 May 02, 2023 - 02:05:00 May 02, 2023 - 02:05:41 May 02, 2023 - 02:05:11 May 02, 2023 - 02:05:15 May 02, 2023 - 02:05:38 May 02, 2023 - 02:05:17 May 02, 2023 - 02:05:16 Apr 27, 2023 - 09:04:15 Apr 27, 2023 - 09:04:00 Apr 27, 2023 - 09:04:30 Apr 27, 2023 - 09:04:55 Apr 27, 2023 - 09:04:50 Apr 27, 2023 - 09:04:40

Newer

X-Gantry alignment

Written By: Miguel Cruz (and one other contributor)

Comments: 3
Favorites: 0
Completions: 8

Steps

Step 1 Check if your X - Gantry is square

The space between the XY_Joiners to the front plates should be the same.

If the space is equal on both sides, you may skip to the next chapter.

Push the X-Gantry foward
The space between the XY_Joiners to the front plates should be the same.
If the space is equal on both sides, you may skip to the next chapter.
If the space isn't equal and the gantry doesn't sit flush on front, please follow the next steps.