-
-
All our CNC Machines are designed by default to accommodate the Router11.
-
If you wish to use a different Spindle/Router with your machine, you can. Simply don't add the Router to your machine configuration and your kit will ship with a Spindle mount only.
-
The default Spindle mount has a diameter of 65mm. However, you can request that we swap it for any of these alternative diameters: 52, 71 and 80mm.
-
-
-
Nema 23 Standard Motor - these motors are perfectly adequate to cut/mill acrylic, PVC, MDF, wood and other soft materials. Spec sheet for the motor can be found on the images of the product page.
-
Nema 23 High Torque Motor - choose these motors if you want to cut harder materials, like aluminium. Spec sheet for the motor can be found on the images of the product page.
-
-
-
This is an optional part that goes under your spindle mount, creating a small pool of light in the area where the tool is working on.
-
If you add the LED Light Ring as an option on your CNC Machine product configurator, we will ship it with a 5500mm Cable by default. This is the length necessary for the largest size machine we sell. You can cut the cable to length if your machine is smaller.
-
The LED Light Ring is not compatible with:
-
Lead CNC 1515
-
80mm Spindle Mount
-
