Changes to 02. Enclosure 2.0 Addon Introduction

Edit by Simon Davie —

Edit approved by Simon Davie

Before
After
Unchanged
Category
Rat Rig V-Core 3.1
Type
how-to
Title
12. Enclosure Assembly
Introduction
***Please note:*** All measurements provided in this guide are based upon building a 300x300 V-Core 3.
If you are building a machine of a different size, the following adjustments can be made to the stated extrusion lengths:
* 200x200: Remove 100mm
* 400x400: Add 100mm
* 500x500: Add 200mm
Time Required Min
No estimate
Time Required Max
No estimate
Difficulty
Moderate
Author
Simon Davie
Public
No

Flags

  • In Progress added.
  • User-Contributed Guide added.