Introduction |
***Please note:*** All measurements provided in this guide are based upon building a 500x500 V-Hive Enclosure. | | If you are building an enclosure of a different size, the following adjustments can be made to the stated extrusion lengths: | | * 600x600: Add 100mm | * 700x700: Add 200mm | To start the build, make sure you have a ***clean and empty working area*** dedicated to this assembly, that way, in case you need to take a break you don’t need to move everything mid-build, decreasing the risks of losing or mismatching other components from outside the kit. Always ***have your tools close*** and organized in order to optimize your workflow. The steps in the Build Guide indicate what components are required and how many to use. In the step title there is a number, for example, (x2) means you have to repeat the step 2 times. | | It is ***strongly recommended*** to assemble the frame on a known flat surface (such as a solid table, work surface or similar). Assembling the frame on a carpeted floor, or other non-flat surface, can cause the finished frame to not be square. |
|