Skip to main content

Changes to 01. V-Hive Enclosure Base Model Introduction

Edit by Miguel Cruz

Edit approved by Miguel Cruz

Before
After
Unchanged
Introduction
To start the build, make sure you have a ***clean and empty working area*** dedicated to this assembly, that way, in case you need to take a break you don’t need to move everything mid-build, decreasing the risks of losing or mismatching other components from outside the kit. Always ***have your tools close*** and organized in order to optimize your workflow. The steps in the Build Guide indicate what components are required and how many to use. In the step title there is a number, for example, (x2) means you have to repeat the step 2 times.
It is ***strongly recommended*** to assemble the frame on a known flat surface (such as a solid table, work surface or similar). Assembling the frame on a carpeted floor, or other non-flat surface, can cause the finished frame to not be square.
- The enclosing panels themselves are not supplied, the user is meant to source them locally. A 4mm thick polycarbonate sheet is suggested.[br]
- DXF files for the panels can be downloaded [link|https://drive.google.com/drive/folders/1Dj8uPp64c3wqMLCTJiglhriTIaCZwenv?usp=share_link|here|new_window=true]