Changes to this Step
Edit by Simon Davie —
Edit approved by Simon Davie
- Before
- After
- Unchanged
Step Lines
| [title] Prepare the printed parts - Part 1 | |
| [* 1] Two of the V-Minion printed parts have sacrificial layers which must be removed prior to assembly. | |
| [* 1] It is recommended to remove them by using a screwdriver, an Allen key, or a drill, to push through the layers. This clears the holes for the screws. | |
| - | [* 2] y_ |
| - | [* 3] Sacrificial layers |
| + | [* 2] y_idler printed part |
| + | [* 3] Sacrificial layers to be cleared |