Changes to Step #1
Edit by Simon Davie —
Edit approved by Simon Davie
- Before
- After
- Unchanged
Step Lines
| [title] Prepare the printed parts - Part 2 | |
| - | [* 10] As in ***Step 1***, the marked sacrificial layers must be cleared. |
| + | [* 10] One of the V-Minion printed parts has sacrificial layers which must be removed prior to assembly. |
| + | [* 10] It is recommended to remove them by using a screwdriver, an Allen key, or a drill, to push through the layers. This clears the holes for the screws. |
| [* 2] y_belt_mount printed part | |
| [* 3] Sacrificial layers to be cleared | |
| [* 4] Prepared printed part |