Changes to Step #1

Edit by Simon Davie —

Edit approved by Simon Davie

Before
After
Unchanged

Step Lines

-[title] Prepare the printed parts - Part 2
+[title] Prepare the printed parts
[* 10] One of the V-Minion printed parts has sacrificial layers which must be removed prior to assembly.
[* 10] It is recommended to remove them by using a screwdriver, an Allen key, or a drill, to push through the layers. This clears the holes for the screws.
[* 2] y_belt_mount printed part
[* 3] Sacrificial layers to be cleared
[* 4] Prepared printed part