Changes to Step #11

Edit by Simon Davie —

Edit approved by Simon Davie

Before
After
Unchanged

Step Lines

[title] Remove the front linear rails
[* 2] Loosen all of the M3 screws securing the linear rail to the V-Core 3.0 frame
[* 3] Remove the linear rail, taking care not to let the carriage leave either end of the rail
[* 4] Repeat the above two steps for the linear rail on the front right
-[* 5] Set the linear rail assembly aside, it will be re-installed during the V-Core 3.1 assembly guide
+[* 10] Set the linear rail assemblies aside, they will be re-installed during the V-Core 3.1 assembly guide