Changes to Step #18
Edit by Simon Davie —
Edit approved by Simon Davie
- Before
- After
- Unchanged
Step Lines
| [title] Remove the left CoreXY idler - Part 2 | |
| [* 2] Remove the marked M5x40 screw | |
| [* 3] Lift the xy_idler printed part off the V-Core 3.0 frame | |
| [* 4] Remove all components of the idler stack | |
| + | [* 5] Retrieve the three 3030 drop-in t-nuts from the 3030 extrusion |