Changes to Step #35
Edit by Simon Davie —
Edit approved by Simon Davie
- Before
- After
- Unchanged
Step Lines
| + | [title] Using the 3.0 base panel with the 3.1 upgrade |
|---|---|
| + | [* 10] It is possible to reuse the V-Core 3.0 base panel with the V-Core 3.1 upgrade, however additional cuts will be required |
| + | [* 10] A 2D printable template, as well as a modified rear motor trim are provided on the [link|https://v-core.ratrig.com/upgrade/#v-core-30-panels-on-31|V-Core 3.0 to 3.1 Upgrade Page] |
| + | [* 10] Refer to the provided image to align the templates for cutting the base panel |
Image 1
No previous image
Added
Image 2
No previous image
Added