Changes to Step #2
Edit by Simon Davie —
Edit approved by Simon Davie
- Before
- After
- Unchanged
Step Lines
| [title] Assemble the T-Shape Plates (x6) | |
| [* 2] M6x12 Cap Head Screw | |
| [* 3] 3030 Drop In T-Nut - M6 | |
| [* 4] T-Shape Joining Plate for 3030 | |
| [* 10] Loosely thread the 3030 T-Nuts onto the M6x12 screws. Do not tighten them at this point. | |
| - | [* 10] Set these plates aside until *** |
| + | [* 10] Set these plates aside until ***Steps 26, 28, 52 & 53*** |