Changes to Step #81

Edit by Simon Davie —

Edit approved by Simon Davie

Before
After
Unchanged

Step Lines

[title] Install the horizontal 3030 panel holders
-[* 2] horizontal 3030 panel holder assembly from ***Step 80***
+[* 2] Horizontal 3030 panel holder assembly from ***Step 80***
[* 3] Align the 3030 panel holder assemblies as shown
[* 4] Tighten the M6x12 screws to secure the assemblies to the frame
[* 9] Take care not to over tighten the M6x12 screws as you can damage the printed parts