Changes to Step #84

Edit by Simon Davie —

Edit approved by Simon Davie

Before
After
Unchanged

Step Lines

[title] Install the door panel magnet frame mounts
-[* 1] Insert wisdom here.
+[* 2] Frame magnet mount assembly from ***Step 4***
+[* 3] Position each magnet mount assembly as shown
+[* 4] The marked gaps should measure XXmm
+[* 5] Tighten the M6x12 screw to secure each assembly to the frame
+ [* 9] Take care not to over tighten the M6x12 screws as you can damage the printed parts
+[* 10] The exact position of the magnet mounts can be adjusted once the top panel in in place