Changes to Step #84
Edit by Simon Davie —
Edit approved by Simon Davie
- Before
- After
- Unchanged
Step Lines
| [title] Install the door panel magnet frame mounts | |
| [* 2] Frame magnet mount assembly from ***Step 4*** | |
| [* 3] Position each magnet mount assembly as shown | |
| [* 4] The marked gaps should measure 5mm | |
| [* 10] It is easiest to align the central magnet mounts once the door panel is in place, position them roughly in the middle for now | |
| [* 5] Tighten the M6x12 screw to secure each assembly to the frame | |
| [* 9] Take care not to over tighten the M6x12 screws as you can damage the printed parts | |
| - | [* 10] The exact position of the magnet mounts can be adjusted once the |
| + | [* 10] The exact position of the magnet mounts can be adjusted once the door is in place |