Changes to Step #90

Edit by Simon Davie —

Edit approved by Simon Davie

Before
After
Unchanged

Step Lines

[title] Optional Extras
[* 10] Rat Rig has developed, and provide, a set of optional extra printed parts for the V-Core 3 Enclosure 2.0
[* 10] Parts available include:
[* 1] Panel trims for the exterior of the enclosure
[* 1] A brand-new, side-mounted, printable spool holder
[* 1] A rear shelf, designed to sit above the electronics and help fully enclose the print volume
[* 1] Other miscellaneous parts
-[* 10] All parts can be found on the [link|https://v-core.ratrig.com/printed_parts/#enclosure-optional-extras|V-Core 3 project pages]
+[* 10] Parts can be found on the [link|https://v-core.ratrig.com/printed_parts/#enclosure-optional-extras|V-Core 3 project pages] and the [link|https://lab.ratrig.com/|Rat Rig Lab site]