Changes to Step #8
Edit by Simon Davie —
Edit approved by Simon Davie
- Before
- After
- Unchanged
Step Lines
+ | [title] Install the bowden clamp |
---|---|
+ | [* 2] Bowden clamp assembly from ***Step 4*** |
+ | [* 3] Position the bowden clamp assembly on the V-Core 3.1 frame |
+ | [* 4] The marked distance should measure 45mm |
+ | [* 5] Insert a length of PTFE tubing into the bowden clamp, as shown |
+ | [* 6] Tighten the M6x12 screw to secure the bowden holder and PTFE to the frame |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added