Skip to main content

Changes to Step #7

Edit by Simon Davie

Edit approved by Simon Davie

Before
After
Unchanged

Step Lines

+[title] Assemble the X-axis gantry frame - Part 6
+[* 2] M12x45 Cap Head Screw
+[* 3] M12 Washer
+[* 4] Place an M12 washer onto each M12x45 cap head screw and loosely screw them through the plate and into the extrusion
+[* 9] Do not fully tighten any of the M12 cap head screws at this point

Image 1

No previous image

New image

Added

Image 2

No previous image

New image

Added