Changes to Step #16
Edit by Simon Davie —
Edit approved by Simon Davie
- Before
- After
- Unchanged
Step Lines
+ | [title] Assemble the X-axis ball screw |
---|---|
+ | [* 2] 1280mm 1610 Ball Screw (1780mm for a 1500x1500 machine) |
+ | [* 10] Unpack and remove all protective packaging from the ball screw |
+ | [* 3] Ball screw nut |
+ | [* 9] ***Do not allow*** the ball screw nut to reach the end of the ball screw |
+ | [* 4] 16mm Ball Screw Block |
+ | [* 5] Install the ball screw block onto the ball screw nut as shown |
+ | [* 6] 6x M5x20 Cap Head Screw |
+ | [* 10] Install an M5x20 screw through each hole in the ball screw nut and into the ball screw block |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added