Changes to Step #19
Edit by Simon Davie —
Edit approved by Simon Davie
- Before
- After
- Unchanged
Step Lines
+ | [title] Install the X-axis ball screw - Part 2 |
---|---|
+ | [* 2] FF12 Ball Screw Mount |
+ | [* 3] M4x20 Cap Head Screw |
+ | [* 10] Insert an M4x20 screw through each of the four holes in the FF12 mount and through the idler plate |
+ | [* 4] M4 Nylon Locking Hex Nut |
+ | [* 10] Install an M4 locking hex nut onto each M4x20 screw and tighten fully |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added