Changes to Step #6
Edit by Miguel Cruz —
Edit approved by Miguel Cruz
- Before
- After
- Unchanged
Step Lines
| [title] Prepare the top and bottom of the frame - Part 1 | |
| [* 2] 500mm 3060 Extrusion | |
| [* 3] 500mm 3030 Extrusion | |
| [* 4] Hidden three way corner assembly | |
| - | [* 9] Ensure the extrusions are flush and square with the hidden three way corner assembly before and after tightening the screws |
| + | [* 9] Ensure the extrusions are flush and square with the hidden three way corner assembly before and after tightening the screws. |
| [* 5] Tighten the M6x8 set screws. |