Changes to Step #7
Edit by Miguel Cruz —
Edit approved by Miguel Cruz
- Before
- After
- Unchanged
Step Lines
- | [title] Prepare the top and bottom of the frame- Part |
---|---|
+ | [title] Prepare the top and bottom of the frame- Part 2 |
[* 2] Install one hidden three way corner assembly into the position shown. Tighten the M6x8 set screw to secure them. | |
[* 3] 500mm 3060 Extrusion | |
[* 9] Ensure the extrusions are flush and square with the hidden three way corner assembly before and after tightening the screws |