Changes to Step #10

Edit by Miguel Cruz —

Edit approved by Miguel Cruz

Before
After
Unchanged

Step Lines

-[title] Assemble the vertical extrusions- Part 1
+[title] Assemble the vertical extrusions - Part 1
[* 2] Insert the 3030 extrusions onto the previously built assembly.
[* 9] Ensure the extrusions are flush and square with the hidden three way corner assembly before and after tightening the screws.
[* 3] Tighten the M6X8 set screws.
-[* 1] Repeat for the remaining 3030 vertical extrusions.
+[* 4] Repeat for the remaining 3030 vertical extrusions.