Changes to Step #25
Edit by Miguel Cruz —
Edit approved by Miguel Cruz
- Before
- After
- Unchanged
Step Lines
+ | [* 2] Install one 90 degree corner assembly onto each end of both 500mm 3060 extrusion and the 548mm 3030 extrusion as shown. Tighten the M6x12 screw to secure them. |
---|---|
+ | [* 9] Ensure the corner assemblies are flush and square with the ends of the extrusions after tightening the screws. |
+ | [* 3] Repeat for all 4 corners. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added