Skip to main content

Changes to Step #25

Edit by Miguel Cruz

Edit approved by Miguel Cruz

Before
After
Unchanged

Step Lines

[title] Assemble the vertical extrusions- Part 2
-[* 2] Install one 90 degree corner assembly onto each end of both 500mm 3060 extrusion and the 548mm 3030 extrusion as shown. Tighten the M6x12 screw to secure them.
+[* 2] Install one 90 degree corner assembly into each end of both 500mm 3060 extrusion and the 548mm 3030 extrusion as shown. Tighten the M6x12 screw to secure them.
[* 9] Ensure the corner assemblies are flush and square with the ends of the extrusions after tightening the screws.
[* 3] Repeat for all 4 corners.