Changes to Step #25
Edit by Miguel Cruz —
Edit approved by Miguel Cruz
- Before
- After
- Unchanged
Step Lines
| - | [title] Assemble the vertical extrusions- Part 2 |
|---|---|
| + | [title] Assemble the vertical extrusions - Part 2 |
| [* 2] Install one 90 degree corner assembly into each end of both 500mm 3060 extrusion and the 548mm 3030 extrusion as shown. Tighten the M6x12 screw to secure them. | |
| [* 9] Ensure the corner assemblies are flush and square with the ends of the extrusions after tightening the screws. | |
| [* 3] Repeat for all 4 corners. |