Skip to main content

Changes to Step #25

Edit by Miguel Cruz

Edit approved by Miguel Cruz

Before
After
Unchanged

Step Lines

[title] Frame Reinforcement
-[* 10] By adding the 90 degree corners the frame will be sturdier, allowing for multiple V-Hive Enclosures staking.
+[* 10] By adding the 90 degree corners the frame will be sturdier, allowing you to stack another module on top.
[* 2] Install one 90 degree corner assembly into each end of both 500mm 3060 extrusion and the 548mm 3030 extrusion as shown. Tighten the M6x12 screw to secure them.
[* 3] Repeat for all 8 corners.