Skip to main content

Changes to Step #12

Edit by Miguel Cruz

Edit approved by Miguel Cruz

Before
After
Unchanged

Step Lines

+[title] Place the top frame square
+[* 2] Assembly with the vertical extrusions
+[* 3] Frame square assembly.
+[* 5] Install one 90 degree corner assembly onto each end of both 500mm 3060 extrusion and the 548mm 3030 extrusion as shown.
+[* 4] Tighten the M6x12 screw to secure them.
+[* 9] Ensure the corner assemblies are flush and square with the ends of the extrusions after tightening the screws.
+[* 8] Repeat for all 4 corners.

Image 1

No previous image

New image

Added

Image 2

No previous image

New image

Added

Image 3

No previous image

New image

Added