Skip to main content

Changes to Step #13

Edit by Miguel Cruz

Edit approved by Miguel Cruz

Before
After
Unchanged

Step Lines

[title] Prepare the back panel
[* 2] 12x M6x12mm Cap Head Screw
[* 3] 12x M6 Washer
-[* 4] 12x M6 T-nut 3030 Drop in
+[* 4] 12x M6 T-nut Drop In 3030
[* 10] Don't tighten the screws.
[* 5] Repeat for all the hole in the panel.