Skip to main content

Changes to Step #18

Edit by Miguel Cruz

Edit approved by Miguel Cruz

Before
After
Unchanged

Step Lines

[title] Front door assembly
[* 2] 10x M6x12mm Cap Head Screw
[* 3] 10x M6 Washer
[* 4] 12x M6 Locking Nut
[* 5] 2x M6x18mm Cap Head Screw
[* 9] Take care not to over-tighten the screws as you can damage the panel.
[* 6] Insert the screw-washer-nut assembly into each pair of holes.
-[* 7] Insert the M6x18 screws with the V-slot handle and the locking nuts.
+[* 7] Assemble the M6x18 screws with the V-slot handle and the locking nuts.