Skip to main content

Changes to Step #24

Edit by Miguel Cruz

Edit approved by Miguel Cruz

Before
After
Unchanged

Step Lines

+[title] Assemble the 90 degree corners (x12)
+[* 2] 2x M6x12 Cap Head Screw
+[* 3] 2x M6 Washer
+[* 5] Cast 90 Degree Corner Bracket for 3030
+[* 10] Loosely thread the 3030 T-Nuts onto the M6x12 screws. Do not tighten them at this point.

Image 1

No previous image

New image

Added