Changes to Step #24
Edit by Miguel Cruz —
Edit approved by Miguel Cruz
- Before
- After
- Unchanged
Step Lines
[title] Assemble the 90 degree corners (x12) | |
[* 2] 2x M6x12 Cap Head Screw | |
[* 3] 2x M6 Washer | |
+ | [* 4] 2x M6 T-nut Drop In 3030 |
[* 5] Cast 90 Degree Corner Bracket for 3030 | |
[* 10] Loosely thread the 3030 T-Nuts onto the M6x12 screws. Do not tighten them at this point. |