Changes to Step #23
Edit by Miguel Cruz —
Edit approved by Miguel Cruz
- Before
- After
- Unchanged
Step Lines
| - | [title] Assemble the V-Hive stack locators |
|---|---|
| + | [title] Assemble the V-Hive Stacking Tabs |
| + | [* 11] If you plan on stacking a second module on top of this one, please follow the next steps which will help reinforce the structure for extra stability |
| [* 2] 2x M3x12 Cap Head Screw | |
| [* 3] 2x T-nut Drop in 3030 M3 | |
| [* 4] V-Hive stack locator printed part | |
| [* 10] Assemble 6x V-Hive stack locator. | |
| [* 5] Mount the stacking printed parts onto the top of the V-Hive enclosure by tightening the M6x12 screws. | |
| [* 6] Repeat for the other five parts. |