Changes to Step #2
Edit by Miguel Cruz —
Edit approved by Miguel Cruz
- Before
- After
- Unchanged
Step Lines
| [title] Assemble the mounting rails | |
| [* 2] Mounting Rails | |
| [* 3] 4x 90 Degree Corner Bracket Assembly | |
| [* 10] Make sure to place the 90 degree corner bracket assemblies accordingly to the distances bellow: | |
| [* 4] 110 mm | |
| [* 5] 200 | |
| + | [* 11] Keep the rounded side facing the printer. |
| [* 11] The measurements are the same for the other rail. | |
| [* 6] Keep this side on the front of the printer. |