Skip to main content

Changes to Step #3

Edit by Miguel Cruz

Edit approved by Miguel Cruz

Before
After
Unchanged

Step Lines

[title] Assemble the middle 4040 extrusion
[* 2] 920mm 4040 Extrusion
[* 3] 4040 Cast Corner Assembly
-[* 4] Install corner assemblies onto both sides of each end of the 4040 extrusion as shown. Tighten the M8x16 screw to secure them.
+[* 4] Install corner assemblies on to both sides of each end of the 4040 extrusions as shown. Tighten the M8x16 screw to secure them.
[* 5] Ensure the corner assemblies are flush and square with the ends of the extrusions after tightening the screws