Changes to Step #19
Edit by Miguel Cruz —
Edit approved by Miguel Cruz
- Before
- After
- Unchanged
Step Lines
+ | [title] Inspect & test the HG15 linear rails |
---|---|
+ | [* 2] With the rail still on the absorbent paper towels, carefully and slowly move the carriage from one end of the rail to the other |
+ | [* 10] Both carriages should move smoothly over the entire length of the rail |
+ | [* 9] Small changes in resistance are normal, but the carriage becoming very hard to push, or binding completely are not |
+ | [* 3] Repeat the previous test whilst applying a small amount of force downwards on the carriage |
+ | [* 10] The carriage will likely travel more smoothly when applying a downwards force, this is normal |
+ | [* 4] Repeat the process to check the second carriage on the rail |
+ | [* 9] If the carriage does not move smoothly, or binds completely, refer to the [guide|15|Linear Rail Troubleshooting Guide] |
Image 1
No previous image
Added
Image 2
No previous image
Added