Changes to Step #20
Edit by Miguel Cruz —
Edit approved by Miguel Cruz
- Before
- After
- Unchanged
Step Lines
| + | [title] Assemble the HG15 linear rails |
|---|---|
| + | [* 9] Do not allow the linear rail carriages to leave the end of the rail at any point |
| + | [* 2] HG15 Linear Rail |
| + | [* 3] Insert an M4x20 cap head screw in to each of the holes on the linear rail |
| + | [* 4] Loosely thread a 4040 T-Nut on to each of the M4x20 screws |
| + | [* 10] Repeat these instructions for the second linear rail |
Image 1
No previous image
Added
Image 2
No previous image
Added