Changes to Step #27

Edit by Miguel Cruz —

Edit approved by Miguel Cruz

Before
After
Unchanged

Step Lines

[title] Screw through the Nut Blocks
[* 2] Nut Block for TR8 x 8mm
[* 3] Screw the Lead Screw through both Nut Blocks.
-[* 11] Make sure the M5 Nylon Locking Hex Nuts on the Nut Blocks are facing the assembly.
+[* 10] Make sure the M5 Nylon Locking Hex Nuts on the Nut Blocks are facing the assembly.