Changes to Step #30
Edit by Miguel Cruz —
Edit approved by Miguel Cruz
- Before
- After
- Unchanged
Step Lines
| - | [title] Attach |
|---|---|
| - | [* 2] Thrust Bearing |
| + | [title] Attach the Tensioner Nut |
| + | [* 2] Thrust Bearing F8-16M |
| [* 3] Tensioner Nut | |
| [* 10] Insert the Thrust Bearing and then screw the Tensioning Nut, just a tiny bit, so it holds its position. | |
| + | [* 2] Do not tighten the screw on the Tensioner Nut yet. |