Skip to main content

Changes to Step #30

Edit by Miguel Cruz

Edit approved by Miguel Cruz

Before
After
Unchanged

Step Lines

[title] Attach the Tensioner Nut
[* 2] Thrust Bearing F8-16M
[* 3] Tensioner Nut
[* 10] Insert the Thrust Bearing and then screw the Tensioning Nut, just a tiny bit, so it holds its position.
-[* 2] Do not tighten the screw on the Tensioner Nut yet.
+[* 9] Do not tighten the screw on the Tensioner Nut yet.