Changes to Step #25
Edit by Miguel Cruz —
Edit approved by Miguel Cruz
- Before
- After
- Unchanged
Step Lines
| + | [title] Secure the X-axis gantry - Right Side - Part 1 |
|---|---|
| + | [* 9] At least one other person should continue to support the X-axis gantry during this step |
| + | [* 10] Align one of the HG15 linear rail carriages with the holes on the X-axis gantry plate |
| + | [* 2] 8x M4x18 Cap Head Screw |
| + | [* 3] 8x M4 Washer |
| + | [* 5] Install an M4 washer on to each of the M4x18 screws, then insert them through the X-axis gantry plate, the HG15 spacer plate, and screw them into the HG15 linear rail carriage |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added